At Hudson Aquatic, we’ve developed a water quality service program of best practices with an expert in addressing water quality issues. For any Hudson underwater treadmill system or custom pool, you can call or email Ask Sam and discuss your situation with Sam Reinking. To help him answer your questions and resolve your issue, be sure to have available your water chemical log sheet and any history of details. We understand how important water quality affects your success. For best results and to avoid therapy down times, contact Ask Sam as soon as a problem exists.
Twice per day. Beginning and end of each day is suggested.
Patient and trainer (if entering water) should shower off oils, lotions, shampoos, and any other contaminants.
Use an ammonia-free hard surface disinfectant to wipe down doors and windows each day, or after each use.
Immediately press the e-stop button and manually open treadmill waste valve to gravity drain contaminated treadmill water. Then follow the owner’s manual instructions.
A: Use chlorine neutralizer per container directions.
B: Drain 1/2 water storage tank and fill with fresh water to dilute.
A: White foam indicates cleaners and contaminants are present. Add additional Foam Out chemical.
B: Brown foam is a sign of problems with sanitizer levels. A shock treatment, or hyper-chlorinated treatment is required.
Calcium build up indicates high pH levels in the water. Refer to owner’s manual to adjust and maintain correct levels.
First, check if recirculation pump is working, if the filter needs cleaned, and check pressure. Next press the reset button on the heater and check the thermostat setting.
Open wounds/rashes – history of seizures or heart disease – urinary infections – infections disease – high or low blood pressure – light-headedness – fever – lower-extremity sensory deficit – incontinence – senility – non-ambulatory – menstrual cycle.